|
|
|
Flex-Eye Heavy-Duty &
Multi-Grip &
JL-R Series Grips
|
 Flex-Eye Heavy-Duty Grip
Here is a
powerful grip for pulling big conductors and will travel smoothly
through pulleys. It is made of highest quality, flexible aircraft
strand steel, integrated with a new flexible eye. The eye itself is
composed of braided strands (rather than being rigid) to give it
maximum flexibility in going around angle pulls or through small
openings, Strands of the grip are retained at the head by a
stainless steel spring, eliminating a rigid compression sleeve.
|
| Part # |
Size Range |
Approx.
Brk. Strgth. |
Working Load |
Eye |
Mesh |
| HDFE-1/4"-1/2" |
1/4" - 1/2" |
3,700 lbs. |
1,200 lbs. |
4" |
22" |
| HDFE-1/2"-7/8" |
1/2" - 7/8" |
10,000 lbs. |
2,400 lbs. |
6" |
42" |
| HDFE-7/8"-1 3/8" |
7/8" - 1 3/8" |
28,000 lbs. |
5,700 lbs. |
7" |
48" |
| HDFE-1 3/8"-2" |
1 3/8" - 2" |
32,000 lbs. |
9,600 lbs. |
7" |
50" |
| HDFE-2"-2 3/4" |
2" - 2 3/4" |
49,000 lbs. |
11,500 lbs. |
7" |
52" |
| HDFE-2 3/4"-3 1/2" |
2 3/4" - 3 1/2" |
50,300 lbs. |
13,500 lbs. |
7" |
54" |
| HDFE-3 1/2"-4 1/4" |
3 1/2" - 4 1/4" |
65,400 lbs. |
15,300 lbs. |
7" |
56" |
| HDFE-4 1/4"-5" |
4 1/4" - 5" |
70,000 lbs. |
17,900 lbs. |
7" |
58" |
| HDFE-5"-5 3/4" |
5" - 5 3/4" |
70,000 lbs. |
17,900 lbs. |
7" |
60" |
| HDFE-5 3/4"-6 1/2" |
5 3/4" - 6 1/2" |
70,000 lbs. |
17,900 lbs. |
7" |
60" |
|
|
Flex-Eye Multi-Grip
 For support and pulling of
different size cables from one flexible eye. This gives
complete support for each conductor, where supporting a
bundle is not desirable. Used in conjunction where
severe vibration may be encountered (i.e. mine shaft, industrial, adjacent to heavily traveled
freeways). |
| |
|
Illustration shows Flex-Eye with
1-A, 3/4"-1 1/4" Single Weave
1-A, 3/4"-1 1/4" Double Weave
1-B, 1 1/4"-2" Triple Weave
When ordering, please give sizes and number of conductors to be supported. |
|
|
|
Model JL-R Series Grips
|
|
The JL-R seriesare designed to be used in
secondary light duty pulls. The neoprene cone at the front of the grip helps the grip and cable go around the tightest bends easily
and smoothly. If installed properly, the cone can also help eliminate possible cable lubricant migration by sealing off the end
of the cable during a pull.
|
| Part # |
Size Range |
Approx.
Brk. Strgth |
Working Load |
Eye |
Mesh |
| XS-JL-25-R |
1/4" - 1/2" |
1,200 lbs. |
600 lbs. |
3 1/2" |
6" |
| XS-JL-50-R |
1/2" - 3/4" |
2,500 lbs. |
1250 lbs. |
4" |
8" |
| XS-JL-100-R |
3/4" - 1" |
2,800 lbs. |
1400 lbs. |
4 1/2" |
10" |
| XS-JL-125-R |
1" - 1 1/2" |
4,500 lbs. |
2250 lbs. |
5 1/2" |
13" |
|
|
|
|
