Lewis Manufacturing Company ©

Industrial Products
Models Menu

>> PICTURE INDEX
Dual Lift-Eye / Cord Cap
Dual Lift-Eye TB
Fiber Optic CM, SL, SLR
Fiber Optic X - XIE
Flex-Eye & JL-R Grips
Heavy Duty Split Grips
Hook Bail Grips
Hook Bail TB Grips
Inline Horizontal Grips
Kit & Grip Cases
Loop Bail Grips
Loop Bail TB Grips
Maxi-Grips
Misc. Hardware
Offset Eye Grips
Offset Eye TB Grips
Pulling Collars
Pulling Grips AAA to B
Pulling Grips C to F
Pulling Grips G to K
Pulling Grips OH, R, WRC
Ring & Conduit Riser
Riser Hook Bail Grips
Rod / Lace Closing
Snake Grips
Special Fiber Optics
Special Head Grips
Split Rod & Lace
Split Ring Grips
Strain Relief Grips
Swivel - Grease Zerk
Swivel - Grips
Swivel - Heavy Duty
Swivel - Links
Swivel - Regular Duty
Swivel - Sealed
Swivel - Sealed Flange
Swivel - Sealed Thrust
Swivel - Toggles
U-Bail Grips
U-Bail TB Grips
X-Series Grips

Swivel Toggles For

Ball Bearing Swivels

Lewis Swivel Toggles are used in conjunction with our ball bearing swivel. Provides a 90 degree "breakover" when pulling through angle structures or sharp bends in conduit.

WARNING

It is important that you read and understand all breaking strength, safety and technical data relating to all Lewis Manufacturing Company products before use. Make a complete inspection of swivels before each use. Do not alter or modify units. Make sure that the end pens make up properly and Allen screw is in place. Rotate swivel by hand to determine proper operation of bearings. Please order carefully. Lubricate all grease able swivels before and after each use. Do not exceed published working load on any Lewis ball bearing swivel.

(TW) Regular Duty Swivel Toggle
Part #	Length (A)	Pin Diameter (B)	Jaw (C)	Diameter (D)	Working Load	Approx. Break Stgth.
TW-1	2 3/4"	7/16"	5/8"	1 11/32"	5,000 lbs.	15,000 lbs.
TW-2	3 5/8"	1/2"	7/8"	1 5/8"	5,400 lbs.	16,200 lbs.
TW-3	4 1/4"	5/8"	1"	2"	12,000 lbs.	36,000 lbs.
TW-4	5"	3/4"	1 1/4"	2 1/4"	15,000 lbs.	45,000 lbs.

(THD) Heavy Duty Swivel Toggle
Part #	Length (A)	Diameter (D)	Jaw (C)	Working Load	Approx. Break Stgth.
THD-0	3"	1 1/8"	1/2"	5,400 lbs.	16,200 lbs.
THD-1	3 1/2"	1 3/8"	1/2"	9,000 lbs.	27,000 lbs.
THD-2	4 1/2"	1 5/8"	5/8"	12,000 lbs.	36,000 lbs.
THD-3	5 1/8"	2"	3/4"	21,000 lbs.	63,000 lbs.
THD-4	6 1/8"	2 3/8"	7/8"	30,000 lbs.	90,000 lbs.

◊ WARNING ◊

It is important that you read and understand all breaking strength, safety and technical data relating to all Lewis Manufacturing Company products before use.

Distributors & Reps
for Full Access



\| HOME \| Utility \| Oilfield \| Canvas \| Friction \| Industrial \| Download \| Gallery \| Reps \| Contact \| About \|

		© 1998-2007 Lewis Manufacturing Company ~ All Rights Reserved \| Talk to Andy \| Terms of Use \| News \| Rowdy the Snake Wrangler™ \|
		a BizProNet™ design