|
Derrick Belts
|
|
PROVEN AND ACCEPTED by
major oil companies,
production operators and drilling
contractors
throughout the oil fields.
|
| |
|
 Lewis Derrick Belts are constructed of
the best grade woven webbing. This rugged material will
outwear other materials, yet is easy to clean and stays
pliable under changing climatic conditions. All stitches are
sewn with heavy-duty Dacron thread. Copper rivets are placed
at all stress points for reinforcement.
Lewis Snap-on
type derrick belts provide two ways of release:
-
Through the
snap at front or waist-adjusting buckle at the side. Strap
adjustments may be made without removing the belt. All Lewis belts
are of extra strong construction.
-
Adjusting holes are fitted
with brass eyelets and all types of belts are equipped with
drop forged steel fittings.
Lewis Derrick
Belts are drop tested and steel fittings are proof load tested
from 2,000 to 5,000 pounds by independent testing laboratories
to check the webbing and construction. Certified results prove
that they meet the most exacting specifications of safety
engineers.
Lewis safety
belts and tail ropes can now be ordered with "Stainless Steel"
reinforcement. Please request "stainless" when corrosives will
be present while using the safety belt or tail rope (i.e.
offshore drilling). Special waist sizes on all Lewis safety
belts available upon
request.
|
  Type
FAH-1
The Lewis FAH-1 is the result of
over a year of research and development. This new design
incorporates all the quality you have come to expect from Lewis,
with a trend-setting design for use when a full-arrest body harness
is required. Totally cable reinforced, the FAH-1 meets or exceeds
both ANSI 10.14 (1991) as well as the new European Community
standards.
|
 Type
HCB-B
The Lewis HCB-B harness is a fall arrest harness boatswain’s riding
belt with a built-in seat for ensured comfort for extended periods of time.
Can be used with or without seat board.
|
MS-FAH-1
and MB-FAH-1
The MS-FAH (with snap) and MB-FAH (with buckle) belts are furnished
with leg straps, and shoulder straps. These belts have the dual D-Ring system
utilized for working the racking platform. These belts also come equipped with a
D-Ring situated high between the shoulders for a lifeline or deceleration
device. The derrick worker is able to use these belts when working the racking
platform. |
 Type
SC
Lewis Snap-on Cable Reinforced
Derrick Belt
SC Instruction Manual
 |
 Climbing
Belt
HCB-1
Oilfield Climbing belt to be used with counterweight and pulley for
climbing derricks.
HCB Instruction Manual
|
 Type
TB
Lewis Tower, Platform and Tank
Belt
TB Instruction Manual
|
 Type
LB
Lewis Lineman’s Belt |
 Types
MS or MB
Lewis Snap-on Combination Monkey Board and Derrick Belt – type
MS.
Also available in buckle-on model – type MB.
MS or MB Instruction Manual
|
Types
M
Lewis Reinforced Monkey Board
Belt |
 Types
BC
Lewis Buckle-on Cable Reinforced
Derrick Belt
BC Instruction Manual
|
