|
 
|
|
|
|
Flex-Eye Heavy Duty &
Multi-Grip &
JL-R Series Grips
|
 Flex-Eye Heavy Duty Grip
Here is a
powerful grip for pulling big conductors and will travel smoothly
through pulleys. It is made of highest quality, flexible aircraft
strand steel, integrated with a new flexible eye. The eye itself is
composed of braided strands (rather than being rigid) to give it
maximum flexibility in going around angle pulls or through small
openings, Strands of the grip are retained at the head by a
stainless steel spring, eliminating a rigid compression sleeve.
|
|
Part # |
Size Range |
Approx.
Brk. Strgth. |
Working Load |
Eye |
Mesh |
| HDFE-1/4"-1/2" |
1/4" - 1/2" |
3,700
lbs. |
1,200 lbs. |
4" |
22" |
|
HDFE-1/2"-7/8" |
1/2" - 7/8" |
10,000
lbs. |
2,400 lbs. |
6" |
42" |
|
HDFE-7/8"-1 3/8" |
7/8" - 1 3/8" |
28,000 lbs. |
5,700 lbs. |
7" |
48" |
|
HDFE-1 3/8"-2" |
1 3/8" - 2" |
32,000 lbs. |
9,600 lbs. |
7" |
50" |
|
HDFE-2"-2 3/4" |
2" - 2 3/4" |
49,000 lbs. |
11,500 lbs. |
7" |
52" |
|
HDFE-2 3/4"-3 1/2" |
2 3/4" - 3 1/2" |
50,300 lbs. |
13,500 lbs. |
7" |
54" |
|
HDFE-3 1/2"-4 1/4" |
3 1/2" - 4 1/4" |
65,400 lbs. |
15,300 lbs. |
7" |
56" |
|
HDFE-4 1/4"-5" |
4 1/4" - 5" |
70,000 lbs. |
17,900 lbs. |
7" |
58" |
|
HDFE-5"-5 3/4" |
5" - 5 3/4" |
70,000 lbs. |
17,900 lbs. |
7" |
60" |
|
HDFE-5 3/4"-6 1/2" |
5 3/4" - 6 1/2" |
70,000 lbs. |
17,900 lbs. |
7" |
60" |
|
|
Flex-Eye
Multi-Grip
For support and pulling of
different size cables from one flexible eye. This gives
complete support for each conductor, where supporting a
bundle is not desirable. Used in conjunction where
severe vibration may be encountered (i.e. mine shaft, industrial, adjacent to heavily traveled
freeways). |
| |
Illustration shows Flex-Eye
with
1-A, 3/4"-1 1/4" Single
Weave
1-A, 3/4"-1 1/4" Double
Weave
1-B, 1 1/4"-2" Triple Weave
When
ordering, please give sizes and number of
conductors to be
supported. | |
|
|
Model
JL-R Series Grips
|
|
The
JL-R series are designed to be used in
secondary light duty pulls. The neoprene cone at the front of the
grip helps the grip and cable go around the tightest bends easily
and smoothly. If installed properly, the cone can also help
eliminate possible cable lubricant migration by sealing off the end
of the cable during a pull. |
|
Part # |
Size Range |
Approx.
Brk. Strgth |
Working Load |
Eye |
Mesh |
|
XS-JL-25-R |
1/4" - 1/2" |
1,200 lbs. |
600 lbs. |
3 1/2" |
6" |
|
XS-JL-50-R |
1/2" - 3/4" |
2,500 lbs. |
1250 lbs. |
4" |
8" |
|
XS-JL-100-R |
3/4" - 1" |
2,800 lbs. |
1400 lbs. |
4 1/2" |
10" |
|
XS-JL-125-R |
1" - 1 1/2" |
4,500 lbs. |
2250 lbs. |
5 1/2" |
13" |
| |
|
|
